Home / HVAC Sheet Metal Fabrication
Trademark
Product Categories
Markets
New
Malco Long Cut AVs® Metal Cutting Snip – Combo (Straight, Left & Right Cuts) – 3″ Cut Length – Yellow Grip AV33
Malco Long Cut AVs® produce longer and faster cuts with their long blade design. The AV33 model is a combo snip featuring a yellow-colored grip with straight, right, and left […]
Malco Long Cut AVs® Metal Cutting Snip, Right Offset, 2-1/4″ Cut Length – Green Grip AV73
Malco Long Cut AVs® produce longer and faster cuts with their long blade design. The AV73 model features a green colored grip and is designed with a right offset style […]
Malco Long Cut AVs® Metal Cutting Snip Left Offset, 2-1/4″ Cut Length – Red Grip AV63
Malco Long Cut AVs® produce longer and faster cuts with their long blade design. The AV63 model features a red colored grip and is designed with a left offset style […]
Vertical AVs® Snip, Left Cut, AV8
Get a better grip with Malco’s AV Aviation Snips! The forged steel jaws of this left-cutting snip are set at a 90-degree angle to allow easy gripping when cutting sheet […]
Vertical AVs® Snip, Right Cut, AV9
Get a better grip with Malco’s AV Aviation Snips! The forged steel jaws of this right-cutting snip are set at a 90-degree angle to allow easy gripping when cutting sheet […]
Offset AVs® Snip, Right Cut, AV7
Get a better grip with Malco’s AV Aviation Snips! Malco’s AV Aviation Snips feature POWER-FIT performance hand grips that increase productivity and distributes pressure evenly, which results in less user […]
Offset AVs® Snip, Left Cut, AV6
Offset Cut AVs® Mini Snip, Right Cut, AVM7 EV
With an overall length of only 7-1/8 inches (181 mm), the AVs® Mini easily goes to work in tight or awkward spaces where full-size aviation snips are challenged. A 3/4-inch […]
Offset Cut AVs® Mini Snip, Left Cut, AVM6 EV
Standard Cut AVs® Snip, Combo Cut, AV3
Standard Cut AVs® Snip, Right Cut, AV2
Standard Cut AVs® Snip, Left Cut, AV1
Get a better grip with Malco’s AV Aviation Snips! Malco’s AV Aviation Snips feature POWER-FIT™ performance hand grips that increase productivity and distributes pressure evenly, which results in less user […]
7-in-1 C-RHEX® Flip Bit #2 Robertson (Square) Model
QUALITY MEETS PERFORMANCE Malco’s 7-in-1 C-RHEX® Flip Bit #2 Robertson (Square) model with cleanable, reversible, and stackable, color-coded sockets featuring an ultra-powerful magnet with integrated driver head options. Malco’s 7-in-1 […]
7-in-1 C-RHEX® Flip Bit #2 Phillips Model
QUALITY MEETS PERFORMANCE Malco’s 7-in-1 C-RHEX® Flip Bit #2 Phillips model with cleanable, reversible, and stackable, color-coded sockets featuring an ultra-powerful magnet with integrated driver head options. Malco’s 7-in-1 C-RHEX® […]
7-in-1 C-RHEX® Flip Bit T25 Model
QUALITY MEETS PERFORMANCE WITH MALCO C-RHEX® 7-IN-1 FLIP T25 Malco’s 7-in-1 C-RHEX® Flip Bit T25 model with cleanable, reversible, stackable and color-coded sockets featuring an ultra-powerful magnet with integrated T25 […]
Andy™ Camouflage Aluminum Handled Snips 12”
Limited Edition Camouflage Snips hydro dipped with a ceramic clear coat. Sleek styling, easy blade replacement and larger handles make the Andy Snip more versatile. A sleek head design improves […]
Andy™ Offset Aluminum Handled Snips 12” – MC12L
Sleek styling, easy blade replacement, and offset handles make Malco’s offset 12″ AndyTM snip more versatile. Ideal as a vinyl siding snip or for cutting aluminum, copper, or sheet metal. […]
TurboShear® – Heavy Duty, Sheet Metal Cutting Drill Attachment
Malco’s popular sheet metal tool quickly attaches to the chuck of a minimum 12-volt cordless or an A/C electric drill. Capable of 18 gauge capacity in galvanized sheet metal. Telescoping clamp fits large or small drill housing.
TurboShear® – Double Cut Drill Attachment
Make your drill a double-cut metal shear. Now you can get double-cut performance in a versatile Malco TurboShear.
TurboShear®
The original TurboShear sheet metal cutting tool. Quickly attaches to the chuck of a minimum 12-volt cordless or an A/C electric drill. A 20 gauge capacity in galvanized sheet metal.
TurboCrimper® IMPACT
Quickly makes your impact driver a power crimper for 30-24 ga. (0.41-0.71 mm) round metal duct and (0.31-0.61 mm) stove pipe. The extra power of the TurboCrimper, is five times faster than manual sheet metal crimpers, making your job a lot easier.
5-Blade Sheet Metal Crimper
The five blades on the Malco C5R allows maximum crimping power, producing a 1-5/8 inch (41.3 mm) long, shallow, double crimp that replicates factory indentations and ensures a tight fitting, leak-proof connection.
5-Blade Offset Sheet Metal Crimper
The offset sheet metal crimper is an ergonomic solution that is ideal for tight working quarters or working over-head.
3-Blade Sheet Metal Crimper
Downsizes heavy stove pipe and round metal duct to create a male connection for joining sections.
Single Sheet Metal Crimper
Fast, easy to use and lightweight. Handy lock makes tool pocket sized.
Hand Seamers with Forged Jaws
For bending metal and flattening seams, as well as straightening sheet metal or safely gripping and moving metal on the job.
Cast Steel Seamer & Tongs
Durable all-cast-steel construction, maneuverable offset and straight designs, versatile deep jaw openings, precise 135 degree bending capabilities and non-marring vinyl-gripped jaw options.
Portable Mini-Brake
Makes bends to 135 degrees in galvanized sheet steel up to 22 gauge (0.86 mm).
Pan Style Mini-Brake
Fabricate pans and boxes, flashing and fascia corners, plus large metal duct, and roofing components on the job.
Sheet Metal Folding Tool: Fixed Length and Depth
Folding Tool seams are formed from two steel halves, permanently joined together. Handy sight holes ensure proper depth alignment. A perfect sheet metal tool for forming on the job.
“Gold Standard” Sheet Metal Hole Cutters and Cutter Bits
Distinctive gold Bits, Bearings and Pivot Pin signify the longest lasting, fastest cutting, easiest adjusting solution for cutting holes in sheet metal. Up to 20-gauge (1.02 mm) capacity in galvanized steel.
Aviation Snips: Max2000®
Max2000 and Max2000 Classic: Standard Left, Right and Combination Cutting Aviation Snips have wide-opening jaws with a serrated lower blade for fast controlled cuts in vinyl plastics, layered metals and seams. Precisely ground blade tips also cut into tight spaces and flush to 90° walls.
Offset Aviation Snips: Max2000®
The Max2000 Offset Aviation Snips are offered in two handle styles, regular Max2000 and Max2000 Classic. Both handles provide superior hardened blade edges for “maximum” cutting life.
Bulldog Aviation Snips: Max2000®
Malco’s Max2000 bulldog notching and trimming aviation snip with Euro-styled ergonomic handles.
Double Cut Aviation Snips: Max2000®
Max2000 distortion-free, double-cut aviation snip with Euro-styled ergonomic handles.
Andy Classic Aluminum Handled Snips 12″
12 inch (31 cm) long aluminum handled snips feature Andy Classic style handle loops. Replaceable heat treated blades are great for cutting sheet metal, copper, aluminum, or vinyl siding material.
Andy Aluminum Handled Snips 12″
12 inch (31 cm) long aluminum handled snips with heat treated cutlery grade replaceable steel blades. Ideal for cutting vinyl siding, sheet metal, copper, or aluminum.
Andy Classic Aluminum Handled Snips 14″
14 inch (36 cm) long aluminum handled snips feature Andy Classic style handle loops. Replaceable heat treated blades are great for cutting sheet metal, copper, aluminum, or vinyl siding material.
Andy Aluminum Handled Snips 14″
14 inch (36 cm) long aluminum handled snip with heat treated cutlery grade replaceable steel blades. Ideal for cutting vinyl siding, sheet metal, copper, or aluminum.
Andy Aluminum Handled Snips 12″ (Gripped)
12 inch (31 cm) long aluminum handled snips with comfort grips for better fit, feel, and control. Easily replaceable blades are ideal for cutting vinyl siding, sheet metal, copper, or aluminum.
Ultra Lightweight Metal Cutting Snips
The ULC10 Ultra Lightweight Metal Cutting Snip offers a light, yet powerful option for cutting aluminum, and 26 gauge steel.
Forged Steel Snips
Forged steel snips for cutting straight, wide curves, and notches. Three types of forged snips from Malco include regular pattern, circular duckbill, and bulldog pattern snips.
Hand Notcher – 13/16 Inch and 1 Inch
Model N1R for metal duct corner notches and take-off tabs makes a clean 30° “V” shaped cut in 24-gauge (0.71 mm) galvanized steel. Model N2R for metal duct corner notches makes a clean 1-inch deep “V” shaped cut in 24-gauge (0.71 mm) galvanized or (0.61 mm) mild steel.
Snap Lock Punch for Sheet Metal
Raises a projection along edge of sheet metal for locking into rolled edge of sheet to be joined.
Hole Punch – Sheet Metal, Vinyl Plastic
Use for edge hole applications in sheet metal or vinyl plastic including metal ductwork and vinyl window extrusions.
Duct Stretcher – Straight
The low profile and straight body of the DS1 Duct Stretcher allows for use in some of the tightest quarters.
Duct Stretcher – Offset
The offset design of the DS2 duct stretcher provides knuckle-free contact when slipping drive cleats into place.
Locking Duct Stretcher
Locking duct stretcher pulls duct sections together and holds them in place while freeing both hands to align and install drive cleats.
28 Gauge Dampers
Available with or without handles
Damper Regulator Hardware
For use on 24-30 gauge galvanized steel.
Duct Holder
For holding sheet metal ductwork in place. Duct Holders: 1-Pair of clamps with chain.
