Home / HVACR - Sheet Metal Duct
Trademark
Product Categories
Markets
New
Malco Long Cut AVs® Metal Cutting Snip – Combo (Straight, Left & Right Cuts) – 3″ Cut Length – Yellow Grip AV33
Malco Long Cut AVs® produce longer and faster cuts with their long blade design. The AV33 model is a combo snip featuring a yellow-colored grip with straight, right, and left […]
Malco Long Cut AVs® Metal Cutting Snip, Right Offset, 2-1/4″ Cut Length – Green Grip AV73
Malco Long Cut AVs® produce longer and faster cuts with their long blade design. The AV73 model features a green colored grip and is designed with a right offset style […]
Malco Long Cut AVs® Metal Cutting Snip Left Offset, 2-1/4″ Cut Length – Red Grip AV63
Malco Long Cut AVs® produce longer and faster cuts with their long blade design. The AV63 model features a red colored grip and is designed with a left offset style […]
Vertical AVs® Snip, Left Cut, AV8
Get a better grip with Malco’s AV Aviation Snips! The forged steel jaws of this left-cutting snip are set at a 90-degree angle to allow easy gripping when cutting sheet […]
Vertical AVs® Snip, Right Cut, AV9
Get a better grip with Malco’s AV Aviation Snips! The forged steel jaws of this right-cutting snip are set at a 90-degree angle to allow easy gripping when cutting sheet […]
Offset AVs® Snip, Right Cut, AV7
Get a better grip with Malco’s AV Aviation Snips! Malco’s AV Aviation Snips feature POWER-FIT performance hand grips that increase productivity and distributes pressure evenly, which results in less user […]
Offset AVs® Snip, Left Cut, AV6
Offset Cut AVs® Mini Snip, Right Cut, AVM7 EV
With an overall length of only 7-1/8 inches (181 mm), the AVs® Mini easily goes to work in tight or awkward spaces where full-size aviation snips are challenged. A 3/4-inch […]
Offset Cut AVs® Mini Snip, Left Cut, AVM6 EV
Standard Cut AVs® Snip, Combo Cut, AV3
Standard Cut AVs® Snip, Right Cut, AV2
Standard Cut AVs® Snip, Left Cut, AV1
Get a better grip with Malco’s AV Aviation Snips! Malco’s AV Aviation Snips feature POWER-FIT™ performance hand grips that increase productivity and distributes pressure evenly, which results in less user […]
NEW! – Malco 10 Pack Nozzle Replacement (CGSN1) – For CGS1 Caulk Gun
Keep going on the job with the 10 pack of the black Malco Replacement Nozzles are for replacing the nozzles that come in the Malco CGS1 Caulking Tool Kit. Made […]
NEW! Malco 20 oz. Sausage Caulking Gun Tool Kit 12:1 Ratio Drive CGS1
Malco’s 20-oz Sausage Gun Style Caulking Gun Kit offers value to trade pros with ownership through lower-cost sealant per ounce and removes the need to deal with bulky empty cartridges […]
7-in-1 C-RHEX® Flip Bit #2 Robertson (Square) Model
QUALITY MEETS PERFORMANCE Malco’s 7-in-1 C-RHEX® Flip Bit #2 Robertson (Square) model with cleanable, reversible, and stackable, color-coded sockets featuring an ultra-powerful magnet with integrated driver head options. Malco’s 7-in-1 […]
7-in-1 C-RHEX® Flip Bit #2 Phillips Model
QUALITY MEETS PERFORMANCE Malco’s 7-in-1 C-RHEX® Flip Bit #2 Phillips model with cleanable, reversible, and stackable, color-coded sockets featuring an ultra-powerful magnet with integrated driver head options. Malco’s 7-in-1 C-RHEX® […]
7-in-1 C-RHEX® Flip Bit T25 Model
QUALITY MEETS PERFORMANCE WITH MALCO C-RHEX® 7-IN-1 FLIP T25 Malco’s 7-in-1 C-RHEX® Flip Bit T25 model with cleanable, reversible, stackable and color-coded sockets featuring an ultra-powerful magnet with integrated T25 […]
C-RHEX® Cleanable, Reversible Magnetic Hex Drivers (3/8″ and 7/16″)
Malco’s 3/8″ and 7/16″ C-RHEX® cleanable reversible hex drivers fit over a 1/4-inch magnet-tipped, ball locking hex shaft, and can be quickly reversed to change sizes. Get more done by […]
C-RHEX® Sawtooth 3/8 and 7/16 inch
Malco’s 3/8″ and 7/16″ C-RHEX® cleanable reversible hex drivers, with sawtooth features, are the perfect solution for rapidly removing sealant and adhesive-coated fasteners. Get more done by spending less time […]
Andy™ Camouflage Aluminum Handled Snips 12”
Limited Edition Camouflage Snips hydro dipped with a ceramic clear coat. Sleek styling, easy blade replacement and larger handles make the Andy Snip more versatile. A sleek head design improves […]
C-RHEX KIT 1
For maximum accessibility and productivity, Trade Pros can have various hex drivers with different sizes and lengths on hand to easily access tight spaces. The five-piece kit includes multiple hex […]
C-RHEX SAWTOOTH
Rapidly remove screws covered in mastic or sealant with Malco’s new C-RHEX® SAWTOOTH drivers. The must-have hex drivers for every toolkit, Malco’s C-RHEX® SAWTOOTH drivers are versatile, compact and highly […]
Andy™ Offset Aluminum Handled Snips 12” – MC12L
Sleek styling, easy blade replacement, and offset handles make Malco’s offset 12″ AndyTM snip more versatile. Ideal as a vinyl siding snip or for cutting aluminum, copper, or sheet metal. […]
C-RHEX® Cleanable, Reversible Magnetic Hex Drivers (7mm and 8mm)
Malco Products unique C-Rhex line of products (model #’s MSHCM3, MSHMLCM3, and MSHXLCM3) ensures that 7 mm and 8 mm magnetic hex drives are always on hand.
C-RHEX® Cleanable, Reversible Magnetic Hex Drivers (8mm and 10mm)
Malco Products unique C-Rhex line of products (model #’s MSHCM2, MSHMLCM2, and MSHXLCM2) ensures that 8 mm and 10 mm magnetic hex drives are always on hand.
C-RHEX® Cleanable, Reversible Magnetic Hex Drivers (6mm and 8mm)
Malco Products unique C-Rhex line of products (model #’s MSHCM1, MSHMLCM1, and MSHXLCM1) ensures that 6 mm and 8 mm magnetic hex drives are always on hand.
C-RHEX® Cleanable, Reversible Magnetic Hex Drivers (5/16″ and 3/8″)
Malco Products unique C-Rhex line of products (model #’s MSHC1, MSHLC1, MSHMLC1, and MSHXLC1) ensures that 5/16 and 3/8-inch magnetic hex drives are always on hand.
TurboShear® – Heavy Duty, Sheet Metal Cutting Drill Attachment
Malco’s popular sheet metal tool quickly attaches to the chuck of a minimum 12-volt cordless or an A/C electric drill. Capable of 18 gauge capacity in galvanized sheet metal. Telescoping clamp fits large or small drill housing.
TurboShear® – Double Cut Drill Attachment
Make your drill a double-cut metal shear. Now you can get double-cut performance in a versatile Malco TurboShear.
TurboShear®
The original TurboShear sheet metal cutting tool. Quickly attaches to the chuck of a minimum 12-volt cordless or an A/C electric drill. A 20 gauge capacity in galvanized sheet metal.
TurboCrimper® IMPACT
Quickly makes your impact driver a power crimper for 30-24 ga. (0.41-0.71 mm) round metal duct and (0.31-0.61 mm) stove pipe. The extra power of the TurboCrimper, is five times faster than manual sheet metal crimpers, making your job a lot easier.
5-Blade Sheet Metal Crimper
The five blades on the Malco C5R allows maximum crimping power, producing a 1-5/8 inch (41.3 mm) long, shallow, double crimp that replicates factory indentations and ensures a tight fitting, leak-proof connection.
5-Blade Offset Sheet Metal Crimper
The offset sheet metal crimper is an ergonomic solution that is ideal for tight working quarters or working over-head.
3-Blade Sheet Metal Crimper
Downsizes heavy stove pipe and round metal duct to create a male connection for joining sections.
Single Sheet Metal Crimper
Fast, easy to use and lightweight. Handy lock makes tool pocket sized.
C-RHEX® Cleanable, Reversible Magnetic Hex Drivers (1/4″ and 5/16″)
Malco Products unique C-Rhex line of products (model #’s MSHC, MSHLC, MSHMLC, and MSHXLC) ensures that 1/4 and 5/16-inch magnetic hex drives are always on hand.
Zip-in® Self Piercing Sheet Metal Screws
Malco Zip-in® Sheet Metal screws are made with quality in mind. The screws provide faster driving and a greater capacity for fastening heavier gauges of sheet metal than any other self-piercing type. These #1 rated screws work best when used with a Malco C-RHEX™ Cleanable, Reversible Dual Sided Hex Driver.
Bit-Tip® – Drill and Tap Screws
Malco’s Bit-Tip® Drill and Tap Screws produces the optimum hole size, resulting in better thread engagement and a tighter fit. One operation fastening also means no alignment problems.
Drill-in Screws Type A, Single Thread
Malco’s Drill-In screws have a hex shaped slotted head and include 10×1-1/2, 10×2, and 12×2 screw thread/sizes.
Square Pan Head Zip-in® Sheet Metal Screws
Malco’s Pan Head style screws offer the same quality and performance as the original hex style Zip-in® screws.
Zip-in® Register Screws
Malco’s Register Screws offer a secure option for fastening registers to walls.
Painted Sheet Metal Screws
Malco’s Painted Sheet Metal Screws are made from the same high quality Zip-in® design. Offered in clay, musket bronze, royal brown, white, almond, and classic cream.
Impact Grade Quick-Change Extension Bits
Extensions fit any power drill or 1/4-inch power drive holder. Ball bearing on extensions’ holders provides a positive lock on 1/4-inch hex shank chuck drivers and bits.
Hand Seamers with Forged Jaws
For bending metal and flattening seams, as well as straightening sheet metal or safely gripping and moving metal on the job.
Cast Steel Seamer & Tongs
Durable all-cast-steel construction, maneuverable offset and straight designs, versatile deep jaw openings, precise 135 degree bending capabilities and non-marring vinyl-gripped jaw options.
Portable Mini-Brake
Makes bends to 135 degrees in galvanized sheet steel up to 22 gauge (0.86 mm).
Pan Style Mini-Brake
Fabricate pans and boxes, flashing and fascia corners, plus large metal duct, and roofing components on the job.
Sheet Metal Folding Tool: Fixed Length and Depth
Folding Tool seams are formed from two steel halves, permanently joined together. Handy sight holes ensure proper depth alignment. A perfect sheet metal tool for forming on the job.
“Gold Standard” Sheet Metal Hole Cutters and Cutter Bits
Distinctive gold Bits, Bearings and Pivot Pin signify the longest lasting, fastest cutting, easiest adjusting solution for cutting holes in sheet metal. Up to 20-gauge (1.02 mm) capacity in galvanized steel.
Aviation Snips: Max2000®
Max2000 and Max2000 Classic: Standard Left, Right and Combination Cutting Aviation Snips have wide-opening jaws with a serrated lower blade for fast controlled cuts in vinyl plastics, layered metals and seams. Precisely ground blade tips also cut into tight spaces and flush to 90° walls.
Offset Aviation Snips: Max2000®
The Max2000 Offset Aviation Snips are offered in two handle styles, regular Max2000 and Max2000 Classic. Both handles provide superior hardened blade edges for “maximum” cutting life.
Bulldog Aviation Snips: Max2000®
Malco’s Max2000 bulldog notching and trimming aviation snip with Euro-styled ergonomic handles.
Double Cut Aviation Snips: Max2000®
Max2000 distortion-free, double-cut aviation snip with Euro-styled ergonomic handles.
Andy Classic Aluminum Handled Snips 12″
12 inch (31 cm) long aluminum handled snips feature Andy Classic style handle loops. Replaceable heat treated blades are great for cutting sheet metal, copper, aluminum, or vinyl siding material.
Andy Aluminum Handled Snips 12″
12 inch (31 cm) long aluminum handled snips with heat treated cutlery grade replaceable steel blades. Ideal for cutting vinyl siding, sheet metal, copper, or aluminum.
Andy Classic Aluminum Handled Snips 14″
14 inch (36 cm) long aluminum handled snips feature Andy Classic style handle loops. Replaceable heat treated blades are great for cutting sheet metal, copper, aluminum, or vinyl siding material.
Andy Aluminum Handled Snips 14″
14 inch (36 cm) long aluminum handled snip with heat treated cutlery grade replaceable steel blades. Ideal for cutting vinyl siding, sheet metal, copper, or aluminum.
Andy Aluminum Handled Snips 12″ (Gripped)
12 inch (31 cm) long aluminum handled snips with comfort grips for better fit, feel, and control. Easily replaceable blades are ideal for cutting vinyl siding, sheet metal, copper, or aluminum.
Ultra Lightweight Metal Cutting Snips
The ULC10 Ultra Lightweight Metal Cutting Snip offers a light, yet powerful option for cutting aluminum, and 26 gauge steel.
Forged Steel Snips
Forged steel snips for cutting straight, wide curves, and notches. Three types of forged snips from Malco include regular pattern, circular duckbill, and bulldog pattern snips.
Hand Notcher – 13/16 Inch and 1 Inch
Model N1R for metal duct corner notches and take-off tabs makes a clean 30° “V” shaped cut in 24-gauge (0.71 mm) galvanized steel. Model N2R for metal duct corner notches makes a clean 1-inch deep “V” shaped cut in 24-gauge (0.71 mm) galvanized or (0.61 mm) mild steel.
Hole Punch – Sheet Metal, Vinyl Plastic
Use for edge hole applications in sheet metal or vinyl plastic including metal ductwork and vinyl window extrusions.
Snap Lock Punch for Sheet Metal
Raises a projection along edge of sheet metal for locking into rolled edge of sheet to be joined.
Duct Stretcher – Straight
The low profile and straight body of the DS1 Duct Stretcher allows for use in some of the tightest quarters.
Duct Stretcher – Offset
The offset design of the DS2 duct stretcher provides knuckle-free contact when slipping drive cleats into place.
Locking Duct Stretcher
Locking duct stretcher pulls duct sections together and holds them in place while freeing both hands to align and install drive cleats.
Sheet Metal Hammers: Riveting
Available in vinyl gripped and leather gripped.
Sheet Metal Hammer: Setting
Duct Ripper
Specially angled ground tip easily punctures and rips duct to the desired length starting hole.
28 Gauge Dampers
Available with or without handles
Damper Regulator Hardware
For use on 24-30 gauge galvanized steel.
Magnetic Hex Chuck Drivers – Color Coded
Malco precision fit and hardened Magnetic Hex Chuck Drivers, with 1/4-inch power insert shanks.
Vent Saw
Designed for cutting all types of hard and soft wood, and other non ferrous materials including plywood, composition board and siding.
Carbide Tipped Rotary Percussion Bits
Use in any rotary or rotary percussion drilling device for unexcelled performance in brick, tile, granite, concrete, masonry and other similar hard and dense materials.
Sheet Metal Double Ender Drill Bits
Two points for twice the life, twice the convenience.
Sheet Metal Drill Bits
Sheet metal drills with 135° split point design bite into metal precisely where wanted – will not wander.
Step Drills
A unique double flute design ensures the penetration of soft or thin materials at the proper speed.
Magnetic Bit Holder
Power drive 1/4-inch hex shank fits any power drill or 1/4-inch power drive holder. Accepts 1/4-inch hex shank insert bits.
Phillips Chuck Drivers
Power drive 1/4-inch hex insert shank fits any electric power drill or 1/4-inch power drive holder.
Phillips Insert Bit
Fits any 1/4-inch hex magnetic bit holder.
Hand Riveter: 2IN1
Rivet gun for blind rivets with 1/8 inch thru 3/16 inch mandrels.
Hand Riveter: Economy
Lightweight, compact size and slim nose projection allows this riveter to go wherever the work is.
Blind Rivets
Malco blind rivets provide a strong, secure connection between 2 or more sheets of material, that will not loosen with vibration.
Painted Rivets with Aluminum Rivet and Mandrel
Painted rivets packaged in 100 piece bags.
Easy Dispensing Caulking Gun CG18
Smooth action with large, comfortable power grip.
Flexible Lightweight Caulking Gun CG12
Compact design stores in a toolbox.
Professional Square Piston Design Caulking Gun CG20
Heavy duty professional model caulking guns with thumb-activated pressure release.
Utility Caulking Gun CG10
Easy loading and lightweight for smooth, clean operation.
Adjustable Sheet Metal Scribe Tool
Measure, mark and scribe trim lines on sheet metal in one easy operation. Set desired trim depth on scriber extension and tighten knob.
Carbide Tipped Scribe
Solid carbide tip for scribing fine lines on hardened steel as well as glass, ceramics, plastics or sheet metal.
Fast adjusting Scribers
Accurate and fast adjusting. Two sizes for circles up to 32” (81 cm) and 42” (107 cm). Points are easily resharpened or replaced. Nickel plated steel body.
Duct Holder
For holding sheet metal ductwork in place. Duct Holders: 1-Pair of clamps with chain.
Deluxe HVAC Starter Kit – 29 Piece
27 Tools and FREE bags of Zip-in and Bit-Tip Screws kitted in a TB1 Soft-Sided Tool Bag or TBP33 Tool Backpack.
HVAC Starter Kit – 16 Piece
14 Tools and FREE bags of Zip-in and Bit-Tip Screws kitted in a TB1 Soft-Sided Tool Bag or TBP33 Tool Backpack.
Blue Impact-Grade Magnetic Hex Chuck Drivers
These distinctive blue chuck drivers withstand impact driver stress characteristic for each fastening application.
Pin Vise
Use in hand or insert in drill chuck. Pin Vise holds wire gauge drill sizes 61 to 80.
Red Lip Plastic Anchors
Use with wood, sheet metal or lag screws. Flexible anchor is ideal for masonry or stone. Lip on collar prevents anchor from pushing through hole in hollow walls. Kits contain equal quantities of anchors and screws with one matching carbide tipped drill bit.
Scratch Awls
Use to scribe lines on metal, plastic and a variety of other materials. Pierce holes in wood, plastic, leather, – even light gauge metal.
Pocket Sized Sheet Metal Scribe Tool
Scribe commonplace trim lines on galvanized sheet metal quickly and accurately.
Square Head Chuck Drivers
For driving square head, (Robertson), screws into wood and sheet metal.
Expandable Trammel Points
Two sizes handle a variety of layout applications. The TR42 expands to a big 42” (107 cm) radius. The compact TR18 expands to 18” (46 cm) and stores in most tool bags.
Soft Sided Tool Bag
Rugged, heavyweight nylon tool bag organizes large and small tools with ample capacity and multiple interior and exterior pockets.
Tool BackPack
Easily organize, protect and transport your tools in a 33-pocket Ballistic Nylon Backpack.
Plastic Tote Tray
Heavy duty, crush proof tote trays are great for carrying hand tools and fasteners to the job site.
Reciprocating Saw: Metal
Reciprocating saw blade for cutting various forms of metal.
Reciprocating Saw: General Purpose
Reciprocating saw blades for general purpose use. Blades capable of cutting in wood with nails, metal under 3/16 inches, non-ferrous metals, plastic fiberglass, and plaster.
Aluminum Straight Edge Rule
Made from .125 thickness extruded aluminum.
Precision Multi-Use Combination Square
Machined head has self aligning zinc drawbolt for easy blade installation.
Pocket Level
Malco offers a convenient pocket level for easy storage. Built with a strong molded plastic frame with pocket clip.
Tinner’s Circumference Rules
Standard bench rules with circumference readings for sheet metal work.
Magnetic Measuring Tape
Pick the one tape from a choice of three that is ideal for your metalworking needs!
Measuring Tape
Malco Non-Magnetic Measuring Tape offered in 25′ and 30′ length with double riveted tip connection and tough rubber-clad housing.
